Yes, the demo kit shall work out-of-the box.
Last Update: August 8, 2017
December 13, 2016 1791 RC232 Q&A
Related Knowledge Base Posts -
- [RC232] When a packet is transmitted from one module to another, what is the receiving module going to output on its UART? The exact number of bytes sent? Or will it add some extra information like “Byte count, sender address or CRC”?
- [RC232] “we are building an application with one master boat, which communicates with 150 slaves boats (obviously in open sea). Each slave boat will have a bit rate of 1Kbps to the master boat, the signal range must be till 2km. We are considering using RC17xxHP-RC232 modules to communicate with master boat and slaves. Our questions are: It will be the RC1780HP-RC232 module suitable for this application, or you propose some other module? It’s possible with this device to create a multipoint network (one master, many slaves)? Does your modules have frequency hopping function? “
- [RC232] Are the Settings made during Configuration persistent, or do these settings need to be made each time the device is powered on ?