We have merged the two user manual for RC2400 and RC241x as they are 90% the same.
Last Update: October 23, 2017
October 23, 2017 1581 ZNM Q&A
Related Knowledge Base Posts -
- [ZNM] “I’m developing a Zigbee application with your product, RC2400HP-ZNM(SN : RC2400HP 201026). The moudule is controlled via SPI as attached drawings. When I execute H/W reset to ZNM, I can see “”SRDY”” to “”low”” and the result of POLL command is “”064180010200020300″”. I think it’s the value of “”SYS_RESET_IND””, is it right? “
- [ZNM] Could you confirm that the RC2400 HP ZNM are using Z stack revision 2.3.0 . It is possible to have Z stack revision 3.0?
- [ZNM] “We have started a design with TI’s ZNP solution (CC2530). We where also interested in adding the PA/LNA chip (CC2591) for extended range. Based on what I found on the web, this is the same architecture you use in your RC2400HP-ZNM module. I like this module because it’s very compact. My first question would be if we can use the ZNP version of the stack with this? I would guess so, but a confirmation would be appreciated. I’m interested to do a comparison between building our own PCB with TI parts or simply integrate your module. “