Any device may be set to periodically send ‘I’m Alive’ packets. Time between dispatch is configurable.
Last Update: November 9, 2017
November 9, 2017 2477 Tinymesh Q&A
Related Knowledge Base Posts -
- [TINYMESH] We need to burst data so that they can go back to sleep as soon as possible. If my payload is 10bytes and RF set for max range, what is the time it will take to burst to the gateway on a 15hop network and then receive the ACK before it can sleep again?
- [TINYMESH] How many nodes can it be in a Tinymesh network?
- [TINYMESH] “We have a doubt about the connections dynamic and network architecture. Consider the image below: 1 – Gateway, Router and End device ar configured with the same RF Power 2 – Gateway signal can reach directly to End Device 3 – Router can reach to Gateway and End Device 4 – The End Device only can reach the Router when transmitting, but receive the signal from Gateway directly Although the end device can receive the signal from the Gateway (above RSSI acceptance level), once the End Device can’t reach the Gateway directly, the connection is never established and the second way through Router is never choosed. The tiny mesh algorithm favors the shortly way to gateway if the rssi level is above acceptance level. If the end device receive the signal from Gateway above acceptance level, but is not able to reach the gateway directly, even if we have a router between Gateway and End Device the connection is never establish. Do you have any explanation to this behavior and a way to improve and avoid this kind of scenario? “