You need to build an applicaton on top, which will work with the ETS during link and installing a system
Last Update: November 9, 2017
November 9, 2017 1887 KNX Q&A
Related Knowledge Base Posts -
- [KNX] Not easy to monitor the RSSI value, only click the RSSI button on GUI of KNX-CCT can read it, Could you tell how to monitor the RSSI continuously?
- [KNX] Could you tell any way to monitor the BER (or CRC error)? Because I’d like to perform the test of error-free RF distance
- [KNX] “Recently we have purchased the RC1180DK KNX2 demonstration kit from you. However, we have been unable to get it working. The boards are not transmitting/receiving messages. I have tried using the DEMO application to send packets using the KNX packet generator, while the other board is used as KNX packet sniffer. But nothing shows in the sniffer. Thereafter, I checked the configuration memory and it contains mostly 0x00 and 0xFF. See also attached file (configuration_knx2.txt). Then I loaded the factory settings using the load factory settings in the KNX-CCT tool, but the program gives me an exception error at the end. I am also not able to load settings with the program then. See attached file configuration_knx2_default.txt for the default settings that are loaded. The default settings does not seem to match the ones mentioned in the KNX user manual. Do you have an idea what the problem is and how we can get the transmission working? “