Yes, the Routers in Packet mode can be remotely configured from the Gateway. Refer to the Data Sheet for “Over the air configuration”.
Last Update: August 8, 2017
December 21, 2016 2055 Tinymesh Q&A
Related Knowledge Base Posts -
- [TINYMESH] How many nodes can it be in a Tinymesh network?
- [TINYMESH] “We have to develop a system that it can to locate people. I have thought to use RC tiny mesh using the RSSI level, but I would need to know what router I am connected and the RSSI of that router (not all the net). Is that possible? “
- [TINYMESH] “We have a doubt about the connections dynamic and network architecture. Consider the image below: 1 – Gateway, Router and End device ar configured with the same RF Power 2 – Gateway signal can reach directly to End Device 3 – Router can reach to Gateway and End Device 4 – The End Device only can reach the Router when transmitting, but receive the signal from Gateway directly Although the end device can receive the signal from the Gateway (above RSSI acceptance level), once the End Device can’t reach the Gateway directly, the connection is never established and the second way through Router is never choosed. The tiny mesh algorithm favors the shortly way to gateway if the rssi level is above acceptance level. If the end device receive the signal from Gateway above acceptance level, but is not able to reach the gateway directly, even if we have a router between Gateway and End Device the connection is never establish. Do you have any explanation to this behavior and a way to improve and avoid this kind of scenario? “