Our MBUS products do not support multi-hop repeating, and as far as I know, it is not part of the actual standard either.
Last Update: August 8, 2017
February 22, 2017 2494 Wireless M-Bus Q&A
Related Knowledge Base Posts -
- [W-MBUS] “We are interested in using Radiocrafts modules in our product. We need to install around 150+ sensors per house which are connected to one concentrator (master) device. Sensor are small and therefore using external antenna is not an option which may be problematic when using 169MHz? Those sensors are installed into houses with concrete walls and range requirements are therefore at least 150+ meters in NLOS situations. We are considering to use Wireless M-BUS protocol or some similar which do not require acknowledgements from the sensor. We prefer sub 1-GHz radio because of coverage. Could you suggest some of your modules which support 150+ slaves in one network and extended range at least 150+ meters in urban area? Please also take into account our antenna limitations. “
- [W-MBUS] Is there a way to configure the RC1180-MPC1 for half litre pulses? If not can the firmware be updated to have a setting for this?
- [W-MBUS] “I’m doing a reasearch for our new project involving AMR readout of gas/water/elektricity meters. I’m looking for a device that will be capable of reading pulses from a meter and send them wirelessly to local data logger. This has to be standalone solution as receiver has been already chosen. Do you have such device in your portfolio? “