Yes, ultrasonic welding or cleaning is known to destroy SAW components.
Last Update: October 10, 2017
October 10, 2017 578 General FAQ
Related Knowledge Base Posts -
- [General] “I have a question regarding the coexistence of your 900MHzISM radios such as RC1081 with GSM. A GSM transmitter emits 33 dBm but your maximum allowed input power is 10 dBm. Does this translate into the rather demanding requirement of minimum 23dB antenna isolation? What is the effect of having above 10dBm fed into transceiver, will the receiver only be temporarily saturated or is there a risk of permanent damage. What is the maximum allowed level to avoid permanent damage. A second question regarding interferers. As I read your datasheet a blocking interferer can be allowed to be -106dBm+3(level above sensitivity limit)+75(stated typ interferer rejection)=-28dBm. Am I interpretating your figures correctly? “
- [General] I need info about the possible range when using higher data rates
- [GENERAL] We are loosing packets, about 625 packets transmitted ( at 32ms), we have 1 or 2 lost 3- only one transmitter and one receiver.