Yes
Last Update: December 20, 2017
December 20, 2017 1953 Wireless M-Bus Q&A
Related Knowledge Base Posts -
- [W-MBUS] “I were unable to made RC1180-MBUS3 modules work in REPEATER mode using T frames. I have programmed the module following the User Manual procedure, show below NETWORK_ROLE = 0x002 MBUS_MODE = 0x001 Using the “”M”” command to record the non volatile memory. But it doesn’t work. “
- [W-MBUS] “We are following observations on the MBUS3 repeater 1. Repeater repeats the message after Random delay we have observed it as up to 20 seconds. 2. Repeater does not repeat the message in the sequence it is received . 3. Sometimes message does not get repeated. We have tested this when with the Transmitter transmits every 3 seconds and at the receiver it is replied within 500 mSec of received message. Can you please give your comments on these observations. “
- [W-MBUS] “In your mbus manual wrote (pag 4): “”In OMS (MBUS3) the master sends a command with its own address as Link Layer Address, and the slaves address as Application Layer Address.”” You mean that only long Appl header (12 byte) containing the slave address is granted ? If I got it the MUC and slaves have same link address (i.e MUC address) .. is it correct? Does your mailbox feature use this format ? “