This document covers the relevant information about all variants of Tinymesh modules, such as product features, reference data, circuit and pin description, module configuration, power supply, programming interface, antenna connection ant other product related information.

When designing the PCB layout for the RF modules, there are some measures that need to be taken to get the best performance from the radio module. In this application note, we will suggest some best practices for your product to succeed.

Different applications and different use-cases will need different wireless connectivity technologies. Therefore, selecting the right wireless technology is a critical design decision. Based on radio performance requirements and other criteria, this selection guide will point out the differences between the technologies to help selecting the right one.

This is a short Application Note on the use of license free RF modules in New Zealand, and in particular which modules from Radiocrafts will meet the local radio regulations.

There are many different wireless standards and technologies available to enable the internet of things (IoT). The different technologies have different pro’s and con’s depending on the use case and the end customer. Trying to keep up with the latest wireless trends can drain a company of all its resources and take attention from its core business. The solution recommended by Radiocrafts is to use a modular approach and a common RF module footprint that enables all the technologies offered by Radiocrafts without modifications to the PCB.

Making a good RF antenna is by some considered a challenging part of a wireless product design. It required RF knowledge which is not common among general electrical design engineer and not widespread know-how among software engineers either. Radiocrafts has developed a process and the tools required to make this tuning process simple and straightforward in a way that a person with no RF experience can tune a 169MHz antenna to the final product.

When selecting the right radio technology, the achievable communication range is an important factor. This document review how to analyse radio range based on parameter provided in the data sheets for the different module families. Some measurement results from practical range testing are also shown

The purpose of this document is to list some of the most common issues that customers report when using Radiocrafts modules, and the solution to these issues.

Radiocrafts offers a wide range of wireless modules targeting different solutions word-wide. This Application Note informs how to select and use Radiocrafts modules for FCC compliance in US.

“This Application Note describes how to use the TM-CCT to enable and disable encryption and for entering new 16-bytes AES128 encryption key.”

“TinyMesh features a unique locator function as part of the comprehensive embedded control and monitoring features embedded in the protocol. This Application Note describes the location features in more detail.”

“The Radiocrafts Demo Boards and USB-sticks include an on-board firmware upgrade connector compatible with different flash programming adapters. It is also recommended that PCB layouts include a connector for firmware upgrade. This Application Note describes how to upgrade the firmware of any Radiocrafts RFmodule using either a CC Debugger or the FlashPro-CC tools.”

The RC1xx0 and RC2x00 series of RF Modules with integrated protocol offers easy adaptation of wireless communication utilizing a simple UART serial interface. In their standard versions without any required configuration the modules offer two pins for controlling PA, LNA and SPDTs for signal switching. Two SPDTs are required since it is only one RF pin on the Radiocrafts modules.

In this whitepaper we outline some parts of the required process needed for a product to be accepted in the market with a Radiocrafts module inside. The paper does not cover every license type in every country but instead gives an overview of the certifications needed and how to test against this.

This document describes the importance of LPWAN networks, what separates LPWANs from other technologies in the IoT space, the advantages of using Radiocrafts’ modules in LPWAN network, etc.

The 169 MHz band opens up for new opportunities in long range communication for Industrial Wireless Sensor Networks (WSN), or, what is now called the Industrial Internet of Things (IIoT). The document describes the radio compliance regulations for 169 MHz band.

The new RED (Radio Equipment Directive, 2014/53/EU) is replacing the R&TTE Directive (1999/5/EC), and comes into full force from 2017-06-13. This document describes the main changes in the new directive, information about assessment and Declaration of Conformity, end user responsibilities, etc.

This document covers the relevant information about the different antenna types, their selection criteria and matching, positioning, and selection guide based on different frequencies.

RC Tools Tinymesh contains the PC tools for design with the Tinymesh family. It includes the CCT tool and the SA tool.

To update the module configuration files used by the CCT tool, please unzip and copy these files to the “Modules” folder inside the RCTools TM installation folder.

The Demonstration Kit from Radiocrafts is designed to make it easy for the user to evaluate the module, develop an application and build prototypes. Bundled with the Demonstration Kit is the RCTools PC software to be used together with the Demo Boards.

The Demonstration Kit from Radiocrafts is designed to make it easy for the user to evaluate the module, develop an application and build prototypes. Bundled with the Demonstration Kit is the RCTools PC software to be used together with the Demo Boards.

This User Manual describes how to use the Demonstration Kit for RC11xx-RC232; RC12xx; RC25xx-RC232 module series and provides detailed documentation for the Demonstration Board.

This User Manual describes how to use the Demonstration Kit for RC11xxHP-RC232; RC12xxHP; RC17xxHP-RC232 module series and provides detailed documentation for the Demonstration Board.

RCTools is a powerful and easy to use PC suite that helps you during test, development and deployment of the Radiocrafts modules. The RCTools includes RC_CCT, RC_SA and RC_DT stand-alone applications running under windows .Net Framework. The RCTools is free of charge and easily installed (including .NET and USB Driver) by running the setup file.

The TM-SA (Spectrum Analyzer) enables you to easily scan all or a subset of channels which the module can operate on. This is a handy tool for checking available free channels and to verify that you actually are transmitting on the right frequency. The SA tool also enables the possibility of optimizing antenna performance and relatively comparing the performance of various antenna solutions.

The TM-CCT (Configuration & Communication Tool) helps you work with your Radiocrafts modules. The program enables you to easily configure the module and can additionally work as a terminal window, where data can be sent or received to / from any serial port. The RSSI (Received Signal Strength Indicator) informs you about the Link budget and helps you estimate range.

Schematic and PCB documentation used for the RC11xx-TM and RC25xxxx-TM development kits. This board is recommended to use as a reference design.

Schematic and PCB documentation used for the RC11xxHP-TM and RC17xxxx-TM development kits. This board is recommended to use as a reference design.

In this webinar we will discuss:

•​ Approvals with large reach: FCC and CE
​​​​​​​• Countries making local adaptations of FCC/CE
• Approval in Asia

In this video we show you how to perform digital dimming control using the Tinymesh module.

In this video we show you how to perform digital output control using the Tinymesh module.

In this video we show you how to configure a Tinymesh module through serial port communication when the module is in Packet mode.

In this video we show you how to configure a Tinymesh module through serial port communication when the module is in transparent mode.

In this video we show you how to use the Radiocrafts TM CCT Tool to configure a Tinymesh module.

In this video we showcase a small Tinymesh demo to show how the mesh functionality works with 1 module functioning as a gateway and 2 modules functioning as repeaters.

In this video we demonstrate how to connect your Tinymesh network to the TinySolution cloud platform.

In this video we continue the introduction for the Tinymesh technology, which as mentioned previously, caters to the design engineer that is looking for a robust, simple to deploy platform for devices requiring wireless control and monitoring. The combination of the self forming and self healing Tinymesh features, and the long range and high RF design quality of the Radiocrafts modules makes a perfect match for demanding, high volume applications.

In this video we introduce the Tinymesh technology, which caters to the design engineer that is looking for a robust, simple to deploy platform for devices requiring wireless control and monitoring. The combination of the self forming and self healing Tinymesh features, and the long range and high RF design quality of the Radiocrafts modules makes a perfect match for demanding, high volume applications.

In this blog post we will talk about:

• What truly matters when picking a suitable technology for your application
• A comprehensive checklist of information equipping you with the essential insights needed for evaluating your application’s requirements
• Present a few scenarios with the goal of discussing the different technology options that could be optimal for your system’s performance
• Address the challenges to consider with wireless technologies
• Offer insights into various technologies including BLE, LoRa, Sub-GHz Mesh, ZigBee, Sigfox, Wireless M-Bus and more
• Provide an overview of the technologies available through Radiocrafts

In this blog post we are going to discuss:

• The different features which make the 169 MHz band ideal for sensors and devices in hard-to-reach places
• Provide some examples of recent existing use cases for Radiocrafts’ 169 MHz modules.
• Present the various benefits of designing a device/sensor with a Radiocrafts’ 169 MHz solution, as we are pioneers in the development and standardization of the 169 MHz band.

In this blog post we will discuss:

• The growth of Smart cities and how this is creating a need for better RF technologies with better penetration, using smart metering as an example
• the 169 MHz frequency band which is a great solution to reach indoor objects compared to higher frequencies
• Radiocrafts’ involvement in creating a standardized process for the 169 MHz band
• The Wize Alliance, a nonprofit association founded in 2017 by SUEZ, Sagemcom, and GRDF, who are growing rapidly (over 40 members now) due to their extensive efforts in creating a smart metering solution known as Wize.

Selecting the right wireless technology is a critical design decision. This technology selection guide will:

• Point out the differences between the technologies to help in selecting the right one
• Offer a technology overview
• Review each technology looking at advantages, features and some potential limitations which should be considered for certain applications
• Find a table showing radio modules supporting different technologies and applications

RED/CE Declaration of Conformity for the RC1141-TM module

RED/CE Declaration of Conformity for the RC1181-TM and RC1181HP-TM modules

RED/CE Declaration of Conformity for the RC1701HP-TM module

RED/CE Declaration of Conformity for the RC2500-TM and RC2500HP-TM modules