Yes, RC17xx and RC17xxHP is pin compatible. Only difference is that VCC_PA is only in use for RC17xxHP.
Last Update: August 8, 2017
January 25, 2017
2036
RC232 Q&A Related Knowledge Base Posts -
- [RC232] Designed for EX compliance. What does it mean?
- [RC232] “When I connect to the development board using your software (“”RC232 Configuration and Communication Tool””), everything works fine. But when I connect to the development board from inside my own application for the first time each day (e.g. in the morning when the dev. boards have been powered down for a couple of hours), it only sends 0x00s via the air interface, no matter what i want to send, everything is zero. When I then connect to the board once with your software, everything works fine again and also my application afterwards works fine, and I can send everything correctly again. But I have to do this every morning again. Maybe you have any ideas what the reason for this is or what I could do to fix this problem? “
- [RC232] In your schematic i can see four connections on the RF Antenna port, A66 0 Ohm Resistor to a LGA Pad, L-Bead to Connector P6, Resistor to UFL Connector P3 ,Resistor to hole. Which of them are necessary for the antenna?
