[RC232] Can we mix RC1280 and RC1780 if possible in the same networks The RC1280 and RC1780 are not compatible over the air. Last Update: September 22, 2017 September 22, 2017 1776 RC232 Q&A Related Knowledge Base Posts -[RC232] In the Datasheet of the RC11XXHP-RC232 Module it is written that the Module is “Designed for EX compliance”. What does this mean?[RC232] “I have a question for the RC2500HP-RC232, which seems not to be listed in the datasheet. We have the RC2500HP-RC232 connected to a supply voltage of 3.3v. Which voltage will the uart tx output from the RC2500HP-RC232 be? We found a other note on your site, that suggested that it would only have 2.7v on the uart tx pin, even though the module was supplied with 3.3v. “[RC232] Can you please confirm the width of the PCB trace from the RF pin of the RC1140-RC232 to the copper pad we use to connect a wire antenna in order to achieve 50 ohms Z0? We’ve also done the layout so the power plane has a cutout below the microstrip.