The fooprint and the software is exactly the same on these modules.
Last Update: November 9, 2017
November 9, 2017 3119 RC232 Q&A
Related Knowledge Base Posts -
- [RC232] “When I connect to the development board using your software (“”RC232 Configuration and Communication Tool””), everything works fine. But when I connect to the development board from inside my own application for the first time each day (e.g. in the morning when the dev. boards have been powered down for a couple of hours), it only sends 0x00s via the air interface, no matter what i want to send, everything is zero. When I then connect to the board once with your software, everything works fine again and also my application afterwards works fine, and I can send everything correctly again. But I have to do this every morning again. Maybe you have any ideas what the reason for this is or what I could do to fix this problem? “
- [RC232] “The data rates for the high speed module RC1180HP is more suitable for our needs, but we need to have the possibility to increase the range with a high gain antenna or any kind of amplifier, could that be possible? “
- [RC232] we use your Radiocrafts Modules (1180-RC232) and have problems with the configuration. Could you send us an example in C how to handle this?