Yes
Last Update: December 20, 2017
December 20, 2017 1839 Wireless M-Bus Q&A
Related Knowledge Base Posts -
- [W-MBUS] “How can I make a mobile readout device with RC1180-MBUS3 (…reading heat meters from car or by walking)? How can I setup up a module? Must I use „install mode=accept all”, or should I every time before I want to collect data from heat meters use The install mode, after install mode master keys settings…? “
- [W-MBUS] What kind of CSMA algorithm your module uses? We are worried about compatibility with a 802.15.4 network which should coexist with your module (MBUS3). Will the module detect traffic on the same frequency, and avoid sending at the same time when other two devices communicate? We are not sure about vice-versa also, and we use Atmel at86212 CHIP, on 868 Mhz. (868.3 Mhz, BPSK 20 kbps)
- [W-MBUS] “We are following observations on the MBUS3 repeater 1. Repeater repeats the message after Random delay we have observed it as up to 20 seconds. 2. Repeater does not repeat the message in the sequence it is received . 3. Sometimes message does not get repeated. We have tested this when with the Transmitter transmits every 3 seconds and at the receiver it is replied within 500 mSec of received message. Can you please give your comments on these observations. “