[TINYMESH] I need an information about RC1160-TM module. I want to know if is possible to configure the module as a “repeater” of the input GPIO pin: fox example the change level of the a digital input pin of the transmitter, causes the same change in in the same pin (digital output) of the receiver.

“Each Repeater has configurable I/O-pins. The control and monitoring of those can be controlled from the Gateway, via UART. It is not possible to achieve toggling of pins at one Router causing toggling of a
similar pin in the “other end”; This can be achieved, though, via a small extern microcontroller reading the UART data and converting the readings to I/O control.

    Last Update: November 9, 2017  

    November 9, 2017   1301    Tinymesh Q&A